Search
Extension of Kirchhoff’s Kinetic Analogy to Cylindrical Springs Carrying Distributed Loads
Authors: Sorokin F.D., Badikov R.N., Zhou Su | Published: 24.03.2017 |
Published in issue: #3(684)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: helical cylindrical spring, large displacement, nonlinear boundary value problem, Kirchhoff’s kinetic analogy, conservation law |
Analysis of Gearing of Worm-Helical Gears in Generalizing Parameters
Authors: Tsukanov O.N. | Published: 18.04.2017 |
Published in issue: #4(685)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: worm-helical gears, generalizing parameters, generalized area of existence, local area of existence, geometric-kinematical indicators of gearing |
The Analysis of a Polyurethane Tunnel-Type Shock Absorber Operating Under Shock Loading
Authors: Alasheev V.I., Belkin A.E., Bobrov A.V., Yaroshevich N.V. | Published: 17.05.2017 |
Published in issue: #5(686)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: cast polyurethane, tunnel-type shock absorber, shock tests, power characteristic, mathematical model of the shock absorber |
The Analysis of Edge Broadening in the Process of Parison Tube Swaging
Authors: Ryzhov P.A., Evsyukov S.A. | Published: 17.05.2017 |
Published in issue: #5(686)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: parison tube swaging, conic die, cylindrical section, edge broadening, die edge curvature radius, flow stress |
Optimization of the Transmission Ratio of a Diesel-Powered Machine Unit
Authors: Leonov I.V. | Published: 17.05.2017 |
Published in issue: #5(686)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: transmission ratio, power unit, diesel engine, fuel consumption, dynamic properties, cruise mode |
The Tooth Wear Coefficient of a Harmonic Drive
Authors: Lyuminarsky I.E., Lyuminarsky S.E., Ivanov Y.S. | Published: 19.06.2017 |
Published in issue: #6(687)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: harmonic drive, flex spline, circular spline, wave generator, working surface wear, wear rate |
The Effect of Manufacturing Errors and Deformability of Planetary Gears Elements on Load Distribution in Contact Zones
Authors: Plekhanov F.I., Vychuzhanina E.F. | Published: 19.06.2017 |
Published in issue: #6(687)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: planetary gear, deformability of elements, manufacturing errors, uneven load distribution |
Structural Analysis of a Planetary Gear Mechanism with Two Floating Links
Authors: Timofeev G.A., Samoilova M.V. | Published: 19.06.2017 |
Published in issue: #6(687)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: structural analysis, planetary gear, redundant links, method of graphs |
Modeling and Calculating Residual Stresses in Rolled Profiles
Authors: Karatushin S.I., Khramova D.A., Bildyuk N.A. | Published: 19.06.2017 |
Published in issue: #6(687)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: ANSYS, analytical calculation, residual stresses, rolled profiles, corrections |
Designing Bearing Supports for Roller Assemblies of Three-Roll Helical Rolling Mills
Authors: Kharitonov E.A., Romantsev B.A., Budnikov A.S. | Published: 19.06.2017 |
Published in issue: #6(687)/2017 | |
Category: Calculation and Design of Machinery | |
Keywords: three-roll helical rolling mill, feed angle, rolling angle, radial-shear rolling, roller assembly, bearing assembly |