Search
Balancing a Multirip Bench with Circular Reciprocating Saw Blades
Authors: Phung V.B., Gavryushin S.S., Blokhin M.A. | Published: 04.12.2015 |
Published in issue: #12(669)/2015 | |
Category: Calculation and Design of Machinery | |
Keywords: balancing, sawmill machine, crankshaft, inertial forces, dynamic response, finite element method, NX Advanced Simulation |
Kinematics of a Parallel Mechanism Consisting of Rotational Pairs
Authors: Ioffe M.L. | Published: 04.12.2015 |
Published in issue: #12(669)/2015 | |
Category: Calculation and Design of Machinery | |
Keywords: kinematics of mechanisms, parallel structure, number of degrees of freedom, generalized coordinates, coupling equation, quaternion, MATLAB |
Mathematical Modelling of the Limit Working Capacity of a Harmonic Drive
Authors: Lyuminarsky I.E., Lyuminarsky S.E. | Published: 04.12.2015 |
Published in issue: #12(669)/2015 | |
Category: Calculation and Design of Machinery | |
Keywords: harmonic drive, flex spline, wave generator, teeth interference, teeth slippage, limit torque |
Designing Single-Stage Harmonic Drives and Double-Stage Drives with Harmonic Gear Clutch
Authors: Timofeev G.A., Barbashov N.N. | Published: 20.01.2016 |
Published in issue: #1(670)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: harmonic drive, wave generator, internal deformation, external deformation, flex spline, wave gearing, wave gear clutch |
The Analysis of Relaxation of the Contact Force Between the Fuel Rod and Spacer Grid in the Vver Fuel Assembly
Authors: Gusev M.P., Danilov V.L. | Published: 20.01.2016 |
Published in issue: #1(670)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: fuel rod, spacer grid, relaxation of contact interaction, fuel assembly, neutron irradiation |
The Calculation of the Magnetoelastic Sensor for Controlling the Quality of Welded Joints during Ultrasonic Welding of Plastic Materials
Authors: Volkov S.S., Deryabin A.A., Prilutskiy M.A. | Published: 20.01.2016 |
Published in issue: #1(670)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: magnetoelastic sensor, support, kinetic characteristic, amplitude, plastic material, ultrasonic welding |
The Study of Soundproof Properties of a Three-Layer Plate under the Influence of a Plane Wave
Authors: Lokteva N.A., Serdyuk D.O., Tarlakovskiy D.V. | Published: 20.01.2016 |
Published in issue: #1(670)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: infinite sandwich plates, honeycomb, acoustic environment, plane wave, Fourier transform, soundproofing |
The Calculation of Normal Stresses and Dimensions of the Contact Area in an Inverted Axially Loaded Roller-Screw Mechanism
Authors: Ryahovskiy O.A., Sorokin F.D., Marokhin A.S. | Published: 20.01.2016 |
Published in issue: #1(670)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: planetary roller-screw mechanism, screw surface, screw turn contact, contact stresses |
The Determination of Stochastic Moments of Phase Coordinates in a Nonlinear Structural Model
Authors: Tushev O.N., Donskikh A.M. | Published: 11.02.2016 |
Published in issue: #2(671)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: moment characteristics, orthogonal basis, canonical form of equations, method of moments, iterative procedure, normal Cauchy form |
On the Choice of Parameters of the Bennett Mechanism and Modelling It in MATLAB
Authors: Ioffe M.L. | Published: 11.02.2016 |
Published in issue: #2(671)/2016 | |
Category: Calculation and Design of Machinery | |
Keywords: kinematics of mechanisms, spatial four-link mechanism, Bennett mechanism, number of degrees of freedom, generalized coordinates, coupling equations, direction cosine matrix, MATLAB |